Microsoft Windows Event ID and SNMP Traps Reference Guide for use with SmartStart version 8.25
Storage agents 61
• cpqFcTapeDriveModel
• cpqFcTapeDriveFWRev
• cpqFcTapeDriveSerialNumber
• cpqFcTapeDriveLocation
• cpqFcTapeDriveStatus
Supporting SNMP Trap Description: “Status is now [cpqFcTapeDriveStatus] for a tape drive.”
NT Event ID: 1194 (Hex)0x843504aa (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: External Tape Drive Cleaning Required.
Log Message: The tape drive at location “%4” requires cleaning.
SNMP Trap: cpqExtTapeDriveCleaningRequired - 16024 in CPQFCA.MIB
Symptom: External Tape Drive Cleaning Required trap. The agent has detected a tape drive that
needs to have a cleaning tape inserted and run. This causes the tape drive heads to be cleaned.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqFcTapeDriveCntlrIndex
• cpqFcTapeDriveScsiBus
• cpqFcTapeDriveScsiTarget
• cpqFcTapeDriveScsiLun
• cpqFcTapeDriveModel
• cpqFcTapeDriveFWRev
• cpqFcTapeDriveSerialNumber
• cpqFcTapeDriveLocation
Supporting SNMP Trap Description: “Cleaning is needed for tape drive.”
NT Event ID: 1195 (Hex)0x843504ab (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: External Tape Drive Replace Cleaning Tape.
Log Message: The cleaning tape in the tape drive at location “%4” needs to be replaced.
SNMP Trap: cpqExtTapeDriveCleanTapeReplace - 16025 in CPQFCA.MIB
Symptom: External Tape Drive Cleaning Tape Needs Replacing. The agent has detected that an
autoloader tape unit has a cleaning tape that has been fully used and therefore needs to be replaced
with a new cleaning tape.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqFcTapeDriveCntlrIndex
• cpqFcTapeDriveScsiBus
• cpqFcTapeDriveScsiTarget
• cpqFcTapeDriveScsiLun