Compaq ProLiant DL320 Service Update

ManualsBrandsHP ManualsServerHP ProLiant DL320 Server

White Paper

Help us improve our technical communication. Let us know what you think

about the technical information in this document. Your feedback is

valuable and will help us structure future communications. Please send

your comments to: customerservicestdfeedback@compaq.com.

January 2002

Prepared by Customer Service

Training and Development

Compaq Computer Corporation

Contents

Product Description ....................3

Features.....................................3

System and Mechanical

Spare Parts List ...........................4

Servicing Procedures..................8

Processor...................................8

DVD-ROM/Diskette

Combination Drive ...................13

Service Considerations.............16

References .................................17

Compaq ProLiant DL320

Service Update

Abstract: This service update white paper describes updates to the

Compaq ProLiant DL320 Server. It provides option part numbers for

the DVD/diskette combination assembly, spares part numbers for the

1.13 Ghz processor and service procedures for removing or replacing

the DVD/diskette combination assembly and processor.

Summary of content (17 pages)

PAGE 1
White Paper January 2002 Compaq ProLiant DL320 Prepared by Customer Service Training and Development Compaq Computer Corporation Contents Product Description ....................3 Features.....................................3 System and Mechanical Spare Parts List ...........................4 Servicing Procedures..................8 Processor...................................8 DVD-ROM/Diskette Combination Drive ...................13 Service Considerations.............16 References ......................
PAGE 2
Compaq ProLiant DL320 Service Update 2 Compaq ProLiant DL320 Service Update© 2002 Compaq Computer Corporation Compaq and the Compaq logo are registered in the U.S. Patent and Trademark Office. Microsoft and Windows are trademarks of Microsoft Corporation in the United States and other countries. All other product names mentioned herein may be trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein.
PAGE 3
Compaq ProLiant DL320 Service Update 3 Product Description The ProLiant DL320 Server has a new option, a DVD/diskette combination drive and a new processor speed, 1.13Ghz. This document lists the new option and spares part numbers and reviews the corresponding procedures to service. Features This is a review of the features pertinent to this update. ■ New, faster processor speed: 1.13Ghz ■ New DVD-ROM/diskette drive assembly ProLiant DL320 Server– Internal View Rev. 1.
PAGE 4
Compaq ProLiant DL320 Service Update 4 System and Mechanical Spare Parts List As a review, Figure 1 and 2 illustrate an exploded views of the mechanical and system spare component parts. Table 1 lists the option and spare part numbers. Part numbers for new processor and DVD/diskette combination assembly are highlighted in yellow. Figure 1. Mechanical parts exploded view Rev. 1.
PAGE 5
Compaq ProLiant DL320 Service Update 5 Figure 2. System components exploded view Table 1: System and Mechanical Spare Parts List Item Description Spare Parts List Mechanical Components Rev. 1.
PAGE 6
Compaq ProLiant DL320 Service Update 6 Item Description Spare Parts List Boards 7 User interface board 207725-001 8 CD-ROM (DVD-ROM)/diskette drive assembly backplane 207726-001 9a System board 207723-001 9b System board for 1.
PAGE 7
Compaq ProLiant DL320 Service Update 7 CD-ROM (DVD-ROM)/diskette drive assembly cable * ATA hard drive cables (2) * 20 Two-device terminated SCSI cable (Ultra3) * 207730-001 Note: * Not shown Refer to the QuickSpecs for a more complete list of options. (See References.) Rev. 1.
PAGE 8
Compaq ProLiant DL320 Service Update 8 Servicing Procedures Processor Power down the server Step Action 1. Press the server Power On/Off switch to power down the server. When the server is off, the power LED deactivates. 2. Verify that the fan is off by listening for the fan noise to stop. 3. Disconnect the power cord first from the AC outlet and then from the server. 4.
PAGE 9
Compaq ProLiant DL320 Service Update 9 Remove and replace the access panel Step Action 1. Press and hold down the locking latches . 2. Slide the access panel approximately 1.25 cm (0.5 inch) toward the rear of the unit and lift the panel to remove it . Reverse steps 1 through 2 to replace the access panel. When the locking latches snap into place, the access panel is secure. Rev. 1.
PAGE 10
Compaq ProLiant DL320 Service Update Rev. 1.
PAGE 11
Compaq ProLiant DL320 Service Update 11 Remove and replace the processor CAUTION: Always use a new thermal pad and a new heatsink when replacing processors. Failure to use new components can cause damage to the processor. Step Action 1. Locate the processor on the system board. 2. WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them. CAUTION: The processor socket must be populated at all times.
PAGE 12
Compaq ProLiant DL320 Service Update Step 5. 12 Action CAUTION: Scrape thermal interface material off of the processor carefully to avoid damaging the processor. Store the processor in a static-free environment after removing it from the server. CAUTION: Remove the plastic cover to expose the adhesive side of the thermal pad on the new heatsink before placing the heatsink on the processor. The system will not continue to operate if the plastic cover is left in place.
PAGE 13
Compaq ProLiant DL320 Service Update 13 DVD-ROM/Diskette Combination Drive Power down the server Step Action 1. Press the server Power On/Off switch to power down the server. When the server is off, the power LED deactivates. 2. Verify that the fan is off by listening for the fan noise to stop. 3. Disconnect the power cord first from the AC outlet and then from the server. 4.
PAGE 14
Compaq ProLiant DL320 Service Update 14 Shipping/ejector key Compaq ProLiant DL320 servers include a shipping/ejector key that secures the DVDROM/diskette drive assembly or the bezel blank during shipping. This key should be removed before server deployment. The key is also used to eject an assembly or the blank. CAUTION: Always install the shipping/ejector key in its storage location inside the chassis before shipping the server.
PAGE 15
Compaq ProLiant DL320 Service Update 15 Remove and replace the DVD-ROM/combination drive Step Action 1. Remove the shipping/ejector key from the chassis if you have not already done so. 2. Insert the shipping/ejector key approximately 1.25 cm (0.5 inch) into the DVDROM/diskette drive assembly ejector port on the lower right corner of the server front panel to eject the DVD-ROM/diskette drive assembly .
PAGE 16
Compaq ProLiant DL320 Service Update 16 Service Considerations As with the CD-ROM/diskette combination assembly, the DVD-ROM/diskette combination assembly is a one-piece unit. Item Description Bay 1 DVD-ROM and Diskette drive assembly Note: Expansion Bays are not available in this server. The DVD-ROM and Diskette drive are a single assembly Rev. 1.
PAGE 17
Compaq ProLiant DL320 Service Update 17 References For information on servicing and troubleshooting the Compaq ProLiant DL320 Server refer to the: Install Guide Compaq ProLiant DL320 Setup and Installation Guide This guide is designed to be used as step-by-step instructions for installation and as a reference for operation, troubleshooting, and future upgrades. 203836-001 (PDF,BM) 7210 KB ARCHIVE Internal Link http://www3.compaq.com/support/reference_library/selectproduct.