HP Proliant DL320e Gen8 Carrier-Grade Server Read Before Install Carrier-Grade Instructions.

ManualsBrandsHP ManualsServerHP ProLiant DL320e Gen8 Server

HP ProLiant DL320e Gen8 v2 Carrier Grade

Server Read Before Install

Carrier-Grade Instructions

Abstract

This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are

qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.

This document provides conversion instructions and product-specific information for the carrier-grade version of the HP Proliant

DL320e Gen8 v2 Server.

HP Part Number: 783011-001

Published: June 2014

Edition: 1

Summary of content (8 pages)

PAGE 1
HP ProLiant DL320e Gen8 v2 Carrier Grade Server Read Before Install Carrier-Grade Instructions Abstract This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels. This document provides conversion instructions and product-specific information for the carrier-grade version of the HP Proliant DL320e Gen8 v2 Server.
PAGE 2
© Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. NEBS™ is a trademark of Telecordia Technologies Incorporated.
PAGE 3
Contents 1 Cabling....................................................................................................4 Grounding...............................................................................................................................4 Network Cabling......................................................................................................................4 2 Power Supply and Cable Information............................................................
PAGE 4
1 Cabling This section provides cabling information for installing the HP Proliant DL320e Gen8 v2 Carrier Grade Server. Grounding This carrier-grade product is intended for use in both common bonding networks and isolated bonding networks. Grounding must comply with local, national, and other applicable government codes and regulations. Dedicated safety grounds are implemented on both the AC and DC versions of this product.
PAGE 5
2 Power Supply and Cable Information DC Power Supply Table 1 DC Power Supply Specifications Description Value HP 750W CS DC Power Supply Kit 636673-B21 Input Voltage Range (V DC) 36–72 Frequency Range (Nominal) (Hz) N/A Nominal Input Voltage (V DC) 36 48 72 Maximum Rated Output Wattage Rating (W) 750 750 750 Nominal Input Current (A) 23 17 11 Maximum Rated Input Wattage Rating (Watts) 815 805 795 Maximum British Thermal Unit Rating (BTU-Hr) 2780 2740 2720 IMPORTANT: NOTE: This e
PAGE 6
3 Changing the Settings on the System Maintenance Switch WARNING! To prevent personal injury from hazardous energy, remove watches, rings, or other metal objects. Preventing Electrostatic Discharge To prevent damage to the system, you must take precautions when setting up the system or the handling of parts. A discharge of static electricity from a finger or other conductor might damage system boards or other static sensitive devices. This type of damage can reduce the life expectancy of the device.
PAGE 7
Verifying the System Maintenance Switch Setting switch the setting, you must verify that position #10 on the system maintenance switch is in the ON position. NOTE: Use HP Integrity iLO4 to verify that the thresholds are correct’. For complete information and instructions on using iLO4, see the HP iLO 4 User Guide at the following HP website: http://www.hp.com/go/ilo/docs 1. 2. 3. Log in to iLO4. For instructions, see the HP Integrated Lights-Out 4 User Guide.
PAGE 8
4 Installing the ProLiant DL320e Gen8 v2 Server into a Seismic Rack For information on installing the ProLiant DL320e Gen8 v2 server using the commercial rack mount kit, see the Quick Deploy Rail System Installation Instructions: http://www.hp.