User Manual
Table Of Contents
- HP ProLiant DL360 G7 Server Maintenance and Service Guide
- Notice
- Contents
- Customer self repair
- Illustrated parts catalog
- Removal and replacement procedures
- Required tools
- Preparation procedures
- Safety considerations
- Access panel
- Hard drive bezel blanks
- Dual bezel blank
- Hard drive blank
- SAS and SATA hard drive
- Power supply blank
- Hot-plug power supply
- Hard drive cage
- DVD tray
- DVD-ROM or DVD-RW drive
- Fan module
- Fan blank
- BBWC battery pack or FBWC capacitor pack
- Air baffle
- PCI riser board assembly
- Expansion boards
- PCIe riser board
- PCI-X riser board
- Cache module
- Optional hard drive backplane assembly (top)
- Standard hard drive backplane assembly (bottom)
- Systems Insight Display, LED, and power button assembly
- DIMMs
- Heatsink
- Processor
- System battery
- System board
- HP Trusted Platform Module
- Cabling
- Diagnostic tools
- Component identification
- Specifications
- Environmental specifications
- Server specifications
- Power supply specifications
- HP 460 W CS HE Power Supply (92%) specifications
- HP 460 W CS Platinum Power Supply (94%) specifications
- HP 750 W CS HE Power Supply (92%) specifications
- HP 750 W CS Platinum Power Supply (94%) specifications
- HP 1200 W CS HE Power Supply (90%) specifications
- HP 1200 W CS -48Vdc Power Supply specifications
- Hot-plug power supply calculations
- Acronyms and abbreviations
- Index
Removal and replacement procedures 27
• Avoid hand contact by transporting and storing products in static-safe containers.
• Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.
• Place parts on a grounded surface before removing them from their containers.
• Avoid touching pins, leads, or circuitry.
• Always be properly grounded when touching a static-sensitive component or assembly.
Symbols on equipment
The following symbols may be placed on equipment to indicate the presence of potentially hazardous
conditions.
This symbol indicates the presence of hazardous energy circuits or electric shock
hazards. Refer all servicing to qualified personnel.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this
enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel.
This symbol indicates the presence of electric shock hazards. The area contains no
user or field serviceable parts. Do not open for any reason.
WARNING: To reduce the risk of injury from electric shock hazards, do not open this
enclosure.
This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment,
do not plug telephone or telecommunications connectors into this receptacle.
This symbol indicates the presence of a hot surface or hot component. If this surface
is contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow the surface to
cool before touching.
14.06 - 15.97
kg
31.00 - 35.20
lb
This symbol indicates that the component exceeds the recommended weight for one
individual to handle safely.
WARNING: To reduce the risk of personal injury or damage to the equipment,
observe local occupational health and safety requirements and guidelines for
manual material handling.
These symbols, on power supplies or systems, indicate that the equipment is
supplied by multiple sources of power.
WARNING: To reduce the risk of injury from electric shock, remove all power
cords to completely disconnect power from the system.
Server warnings and cautions
Before installing a server, be sure that you understand the following warnings and cautions.