User Manual
Table Of Contents
- HP ProLiant DL360 G7 Server Maintenance and Service Guide
- Notice
- Contents
- Customer self repair
- Illustrated parts catalog
- Removal and replacement procedures
- Required tools
- Preparation procedures
- Safety considerations
- Access panel
- Hard drive bezel blanks
- Dual bezel blank
- Hard drive blank
- SAS and SATA hard drive
- Power supply blank
- Hot-plug power supply
- Hard drive cage
- DVD tray
- DVD-ROM or DVD-RW drive
- Fan module
- Fan blank
- BBWC battery pack or FBWC capacitor pack
- Air baffle
- PCI riser board assembly
- Expansion boards
- PCIe riser board
- PCI-X riser board
- Cache module
- Optional hard drive backplane assembly (top)
- Standard hard drive backplane assembly (bottom)
- Systems Insight Display, LED, and power button assembly
- DIMMs
- Heatsink
- Processor
- System battery
- System board
- HP Trusted Platform Module
- Cabling
- Diagnostic tools
- Component identification
- Specifications
- Environmental specifications
- Server specifications
- Power supply specifications
- HP 460 W CS HE Power Supply (92%) specifications
- HP 460 W CS Platinum Power Supply (94%) specifications
- HP 750 W CS HE Power Supply (92%) specifications
- HP 750 W CS Platinum Power Supply (94%) specifications
- HP 1200 W CS HE Power Supply (90%) specifications
- HP 1200 W CS -48Vdc Power Supply specifications
- Hot-plug power supply calculations
- Acronyms and abbreviations
- Index
Component identification 68
Rear panel LEDs and buttons
Item Description Status
1 10/100/1000
NIC activity LED
Green = Activity exists.
Flashing green = Activity exists.
Off = No activity exists.
2 10/100/1000
NIC link LED
Green = Link exists.
Off = No link exists.
3
iLO 3 NIC activity
LED
Green = Activity exists.
Flashing green = Activity exists.
Off = No activity exists.
4 iLO 3 NIC link LED Green = Link exists.
Off = No link exists.
5 UID button/LED Blue = Identification is activated.
Flashing blue = System is being managed
remotely.
Off = Identification is deactivated.
6
Power supply 2
LED
Green = Normal
Off = One or more of the following conditions
exists:
•
AC power unavailable
•
Power supply failed
•
Power supply in standby mode
•
Power supply exceeded current limit
7
Power supply 1
LED
Green = Normal
Off = One or more of the following conditions
exists:
•
AC power unavailable
•
Power supply failed
•
Power supply in standby mode
•
Power supply exceeded current limit