Configuring a Pre-eXecution Environment (PXE) using Red Hat Linux 7.0 on Compaq ProLiant Servers
Integration Notes
Help us improve our technical communication. Let us know what you think
about the technical information in this document. Your feedback is valuable
and will help us structure future communications. Please send your
comments to:
OSIntegrationFeedback@compaq.com
March 2001
14K2-0301A-WWEN
Prepared by OS Integration
Engineering
Compaq Computer Corporation
Contents
Setting up a Red Hat Linux
Operating System Image.............3
Prerequisites for Red Hat
Linux ..........................................3
Prerequisites and Minimum
Requirements...............................3
Preparing for a Red Hat
Linux PXE Server.......................4
Setting Up the Linux PXE
Server ........................................4
Software Installation...................5
Launching the PXE Image
for installing Red Hat Linux
7.0..............................................7
ProLiant Health Driver for
Linux.............................................7
Appendix - Web Resources ........8
Configuring a Pre-eXecution
Environment (PXE) using Red
Hat Linux 7.0 on Compaq
ProLiant Servers
Abstract: This integration note discusses configuring a Pre-
eXecution Environment (PXE) using Red Hat Linux on Compaq
ProLiant Servers.
The following topics are covered in detail throughout this integration
note:
• Setting up a Red Hat Linux operating system including the
prerequisites and minimum requirements
• Preparing the Red Hat Linux server
• Installing the Red Hat Linux software
• Launching the PXE for Red Hat Linux
The Appendix has a listing of Compaq web resources and other
helpful websites for the Linux operating system.
In addition to this integration note and for current information about
Linux visit http://www.compaq.com/linux/
.