Installation Manual

The following features support the use of IPv6:
• IPv6 Static Address Assignment
• IPv6 SLAAC Address Assignment
• IPv6 Static Route Assignment
• IPv6 Static Default Gateway Entry
• DHCPv6 Stateful Address Assignment
• DHCPv6 Stateless DNS, Domain Name, and NTP Configuration
• Integrated Remote Console
• Onboard Administrator Single Sign-On
• HPE SIM Single Sign-On
• Web Server
• SSH Server
• SNTP Client
• DDNS Client
• RIBCL over IPv6
• SNMP
• AlertMail
• Remote Syslog
• WinDBG Support
• HPQLOCFG/HPLOMIG over an IPv6 connection
• Scriptable Virtual Media
• CLI/RIBCL key import over an IPv6 connection
• Authentication using LDAP and Kerberos over IPv6
• iLO Federation
• IPMI
IPv6 support for the iLO scripting interfaces requires the following versions of the iLO utilities:
• HPQLOCFG 1.0 or later
• Lights-Out XML Scripting Sample bundle 4.2.0 or later
• HPONCFG 4.2.0 or later
• LOCFG.PL 4.20 or later
• HPLOMIG 4.20 or later
Configuring iLO SNTP settings
Prerequisites
• Configure iLO Settings privilege
• At least one NTP server is available on your management network.
• If you will use a DHCPv4-provided NTP service configuration, DHCPv4 is enabled on the
IPv4 tab.
106 Configuring the iLO network settings