Installation Manual

Nagios is an open source application that can be used to monitor computer systems, networks,
and IT infrastructure.
Download the plug-in from the Nagios website at https://exchange.nagios.org/.
Configuring SNMP settings
Prerequisites
Configure iLO Settings privilege
Configuring the SNMP settings
1. Navigate to the Administration→Management page.
2. On the SNMP Settings tab, select the SNMP setting to enable: Agentless Management
or SNMP Pass-thru.
3. If you selected Agentless Management, enter the following values. These values are
unavailable when the SNMP Pass-thru configuration is selected:
• System Location
• System Contact
• System Role
• System Role Detail
• Read Community
4. Enter the following information:
• Trap Community
• SNMP Alert Destination(s)
• SNMP Port
5. To save the configuration, click Apply.
116 Configuring iLO management settings