Installation Manual

4. Enter the SNMPv3 user options:
• Security Name
• Authentication Protocol
• Authentication Passphrase
• Privacy Protocol
• Privacy Passphrase
5. To save the user profile, click Apply.
More information
SNMPv3 user options
SNMPv3 user options
• Security Name—The user profile name. Enter an alphanumeric string of 1 to 32 characters.
• Authentication Protocol—Sets the message digest algorithm to use for encoding the
authorization passphrase. The message digest is calculated over an appropriate portion of
an SNMP message, and is included as part of the message sent to the recipient. Select
MD5 or SHA.
• Authentication Passphrase—Sets the passphrase to use for sign operations. Enter a value
of 8 to 49 characters.
• Privacy Protocol—Sets the encryption algorithm to use for encoding the privacy passphrase.
A portion of an SNMP message is encrypted before transmission. Select AES or DES.
• Privacy Passphrase—Sets the passphrase used for encrypt operations. Enter a value of
8 to 49 characters.
Configuring the SNMPv3 Engine ID
The SNMPv3 Engine ID sets the unique identifier of an SNMP engine belonging to an SNMP
agent entity. You can configure this value when Agentless Management is selected.
Prerequisites
Configure iLO Settings privilege
Configuring the SNMPv3 engine ID
1. Navigate to the Administration→Management page.
2. On the SNMP Settings tab, scroll to the SNMPv3 Users section.
3. Enter a value in the SNMPv3 Engine ID box.
This value must be a hexadecimal string of 6 to 32 characters, not counting the preceding
0x, and must be an even number of characters (for example, 0x01020304abcdef).
4. Click Apply.
Configuring SNMP alerts
You can configure the Trap Source Identifier, iLO SNMP alerts, forwarding of Insight Management
Agent SNMP alerts, Cold Start Trap broadcast, and SNMPv1 traps.
Prerequisites
Configure iLO Settings privilege
Configuring the SNMPv3 Engine ID 119