Installation Manual

example, the host 192.168.1.1, which has the subnet mask 255.255.252.0, has the
broadcast address 192.168.1.1 | 0.0.3.255 = 192.168.3.255.
• SNMPv1 Traps—When enabled, SNMPv1 traps are sent to the remote management systems
configured in the SNMP Alert Destination(s) boxes.
Using the AMS Control Panel to configure SNMP and SNMP alerts
(Windows only)
1. Open the Agentless Management Service Control Panel.
2. Click the SNMP tab.
3. Update the SNMP settings.
4. Optional: To generate a test alert and send it to the TCP/IP addresses in the Trap
Destination(s) boxes, click Send Test Trap.
Test alerts include an Insight Management SNMP trap and are used to verify the network
connectivity of iLO in HPE SIM. Only users that have the Configure iLO Settings privilege
can send test alerts.
After the alert is generated, a confirmation dialog box opens. Check the HPE SIM console
for receipt of the alert.
5. To save the configuration, click Apply.
More information
SNMP options
SNMP options (Agentless Management configuration only)
Configuring SNMP alerts
SNMP traps
Table 3 (page 122) lists the SNMP traps that you can generate with iLO 4, ProLiant Gen8 and
Gen9 servers, and Synergy compute modules.
Using the AMS Control Panel to configure SNMP and SNMP alerts (Windows only) 121