Installation Manual

This value sets the browser destination of the Insight Agent link on iLO pages.
Enter the FQDN or IP address of the host server. The protocol (https://) and port number
(:2381) are added automatically to the IP address or DNS name to allow access from iLO.
If the URL is set through another method (for example, HPQLOCFG), click the browser
refresh button to display the updated URL.
4. Select the Level of Data Returned.
This setting controls the content of an anonymous discovery message received by iLO. The
information returned is used for HPE SIM HTTP identification requests. The following options
are available:
• Enabled (iLO+Server Association Data) (default)—Enables HPE SIM to associate
the management processor with the host server, and provides sufficient data to enable
integration with HPE SIM.
• Disabled (No Response to Request)—Prevents iLO from responding to HPE SIM
requests.
5. Optional: To view the response that is returned to HPE SIM when it requests iLO management
processor identification by using the provided address, click View XML Reply.
6. To save the changes, click Apply.
For more information about the Insight Management Agents, navigate to the Information→Insight
Agent page.
iLO AlertMail
iLO AlertMail enables you to configure iLO to send alert conditions detected independently of
the host operating system to a specified email address. iLO mail alerts include major host system
events.
Some email service providers establish filters and rules to block problem emails such as spam,
commercial content, and unwanted volume. These tools might block the receipt of messages
generated by iLO. These email services are not suitable for receiving iLO AlertMail messages.
Enabling AlertMail
Prerequisites
• An iLO license that supports this feature is installed. For more information, see the following
website: http://www.hpe.com/info/ilo/licensing.
• Configure iLO Settings privilege
Setting AlertMail to Enabled status
1. Navigate to the Administration→Management→AlertMail page.
2. Select the Enable iLO AlertMail check box.
3. Enter the following information:
• Email Address
• Sender Domain
iLO AlertMail 125