Installation Manual

4. Optional: To send a test message to the configured syslog server, click Send Test Syslog.
This button is available only when iLO Remote Syslog is enabled.
5. To save the changes, click Apply.
Remote syslog options
• Remote Syslog Port—The port number through which the Syslog server is listening.
The default value is 514.
• Remote Syslog Server—The IP address, FQDN, IPv6 name, or short name of the server
running the Syslog service. This string can be up to 127 characters.
On Linux systems, a tool called syslog logs system events. You can set a syslog server on
a remote system that will act as a central logging system for iLO systems. If the iLO Remote
Syslog feature is enabled in iLO, it can send its logs to the syslog server.
Disabling iLO Remote Syslog
Prerequisites
• An iLO license that supports this feature is installed. For more information, see the following
website: http://www.hpe.com/info/ilo/licensing.
• Configure iLO Settings privilege
Setting Remote Syslog to Disabled status
1. Navigate to the Administration→Management→Remote Syslog page.
2. Clear the Enable iLO Remote Syslog check box.
3. To save the changes, click Apply.
Remote Syslog 127