Installation Manual

Completing the post-registration steps
1. Optional: Send a test event to confirm the connection between iLO and HPE remote support.
For instructions, see “Sending a test service event” (page 137).
2. Optional: If you want to receive email alerts about system events, configure AlertMail on the
Administration→Management→AlertMail page in the iLO web interface.
For more information, see “iLO AlertMail” (page 125).
Other Insight Online direct connect registration methods
You can also register a server for Insight Online direct connect by using the following:
• XML configuration and control scripts. For instructions, see the iLO scripting and CLI guide.
• Intelligent Provisioning. For instructions, see the Intelligent Provisioning documentation at
the following website: http://www.hpe.com/info/intelligentprovisioning/docs/.
Editing the web proxy settings(Insight Online direct connect only)
If the web proxy settings change after a server is registered for remote support, update the
settings to enable the server to continue sending data to Hewlett Packard Enterprise.
1. Navigate to the Remote Support→Registration page.
2. Update the following settings, as needed:
• Web Proxy Server—Enter the hostname or IP address.
• Web Proxy Port
• Web Proxy Username
• Web Proxy Password
3. Click Apply.
Registering for Insight Remote Support central connect
Prerequisites
• Your environment meets the prerequisites for embedded remote support registration.
• Configure iLO Settings privilege.
Registering for Insight Remote Support central connect
1. Navigate to the Remote Support→Registration page.
2. Select Connect this server through an HPE remote support host server.
134 Managing remote support