Installation Manual

3. Enter the Host server hostname or IP address and Port number.
The default port is 7906.
4. Click Register.
iLO notifies you that the registration process is finished.
5. Optional: Send a test event to confirm the connection between iLO and Insight Remote
Support.
For instructions, see “Sending a test service event” (page 137).
Other Insight Remote Support central connect registration methods
You can also register a server for Insight Remote Support central connect by using the following:
• XML configuration and control scripts. For instructions, see the iLO scripting and CLI guide.
• Intelligent Provisioning. For instructions, see the Intelligent Provisioning documentation at
the following website: http://www.hpe.com/info/intelligentprovisioning/docs/.
• Insight RS Console. For instructions, see the Insight Remote Support monitored devices
configuration guide.
Unregistering from Insight Remote Support by using the iLO web interface
The process to unregister from remote support depends on whether you used the direct connect
or central connect registration method.
Unregistering from Insight Online direct connect
Prerequisites
Configure iLO Settings privilege.
Unregistering from Insight Remote Support by using the iLO web interface 135