Installation Manual

Data Collection details
• Last Data Collection Transmission—The date and time of the last data collection.
• Last Data Collection Transmission Status—The status of the last data transmission.
• Data Collection Frequency (days) (Insight Online direct connect only)—The frequency at
which data is sent to Hewlett Packard Enterprise.
• Next Data Collection Scheduled (Insight Online direct connect only)—The next date and
time when data will be sent to Hewlett Packard Enterprise.
Sending Active Health System reporting information
Prerequisites
Configure iLO Settings privilege.
Sending Active Health System Information
1. Navigate to the Remote Support→Data Collections page.
2. Click Send Active Health System Report.
3. When prompted to confirm the request, click OK.
The collected data includes Active Health System information from the last seven days.
When the transmission is completed, the Last Active Health System Reporting
Transmission and Last Active Health System Reporting Transmission Status are
updated. The date and time are based on the configured iLO time zone.
You can also download Active Health System information manually and send it to Hewlett Packard
Enterprise. For instructions, see “Active Health System” (page 189).
Viewing Active Health System reporting status in iLO
Navigate to the Remote Support→Data Collections page.
Active Health System reporting details
• Last Active Health System Reporting Transmission—The date and time of the last Active
Health System report.
• Last Active Health System Reporting Transmission Status—The status of the last data
transmission.
• Active Health System Reporting Frequency (days) (Insight Online direct connect
only)—The frequency at which Active Health System data is sent to Hewlett Packard
Enterprise.
• Next Active Health System Reporting Scheduled (Insight Online direct connect only)—The
next date and time when Active Health System data will be sent to Hewlett Packard Enterprise.
140 Managing remote support