Installation Manual

6. From the Advanced Autoconfiguration Setup and Status screen, view or update the
advanced network settings.
7. To save your changes, press F10.
8. Select File→Exit.
More information
Advanced Network Options
Configuring Network Options (iLO 4 Configuration Utility)
1. Optional: If you access the server remotely, start an iLO remote console session.
2. Restart or power on the server.
3. Press F9 in the server POST screen.
The UEFI System Utilities start.
4. From the System Utilities screen, select System Configuration→iLO 4 Configuration
Utility→Network Options, and press Enter.
5. Select any of the Network Options and press Enter, then select a setting or enter a value
for that option and press Enter again.
6. Press F10.
7. Press Esc until the main menu is displayed.
8. Select Exit and Resume Boot in the main menu, and then press Enter.
9. When prompted to confirm the request, press Enter to exit the utility and resume the boot
process.
More information
Network Options
Configuring Advanced Network Options (iLO 4 Configuration Utility)
1. Optional: If you access the server remotely, start an iLO remote console session.
2. Restart or power on the server.
3. Press F9 in the server POST screen.
The UEFI System Utilities start.
4. From the System Utilities screen, select System Configuration→iLO 4 Configuration
Utility→Advanced Network Options, and press Enter.
5. Select any of the Advanced Network Options and press Enter, then select a setting or enter
a value for that option and press Enter again.
6. Press F10.
7. Press Esc until the main menu is displayed.
8. Select Exit and Resume Boot in the main menu, and then press Enter.
9. When prompted to confirm the request, press Enter to exit the utility and resume the boot
process.
More information
Advanced Network Options
142 Managing iLO with the ROM-based utilities