Installation Manual

new state is selected while the UID LED is blinking, that state takes effect when the UID
LED stops blinking.
CAUTION: The UID LED blinks automatically to indicate that a critical operation is underway
on the host, such as Remote Console access or a firmware update. Do not remove power
from a server when the UID LED is blinking.
• TPM Status or TM Status—The status of the TPM or TM socket or module.
• Module Type—The TPM or TM type and specification version. The possible values are
TPM 1.2, TPM 2.0, TM 1.0, Not Specified, and Not Supported. This value is displayed
when a TPM or TM is present on a server.
• SD-Card Status—The status of the internal SD card. If present, the number of blocks in the
SD card is displayed.
• iLO Date/Time—The internal clock of the iLO subsystem.
HPE remote support status
The Connection to HPE section shows the remote support registration status for supported
servers.
The possible status values follow:
• Registered to Remote Support—The server is registered.
• Registration incomplete—The server is registered for Insight Online direct connect remote
support, but step 2 of the registration process is incomplete.
• Not registered—The server is not registered.
• Unable to retrieve the HPE Remote Support information—The registration status could
not be determined.
• Remote Support Registration Error—A remote support connection error occurred.
Active sessions list
The iLO Overview page displays the following information about all users logged in to iLO.
• Login name
• IP address
• Source (for example, HTTPS, Remote Console, or SSH)
Viewing system information with iLO
The iLO System Information page displays the health of the monitored subsystems and devices.
152 Viewing iLO overview and system information