Installation Manual

The information that you can view depends on whether you are using Agentless Management
or SNMP Pass-thru, and whether AMS is installed. For more information, see “iLO SNMP
management” (page 112).
The System Information page includes the following embedded health tabs:
• Summary
• Fans
• Temperatures
• Power
• Processors
• Memory
• Network
• Device Inventory
• Storage
• Firmware
• Software
Viewing health summary information
Navigate to the Information→System Information page, and then click the Summary tab.
The Health Summary page displays the status of monitored subsystems and devices. Depending
on the server configuration, the information on this page varies.
If the server is powered off, the system health information on this page is current as of the last
power off. Health information is updated only when the server is powered on and POST is
complete.
Redundancy status
Redundancy status is displayed for the following:
• Fan Redundancy
• Power Status
Subsystem and device status
Summarized status information is displayed for the following:
• BIOS/Hardware Health
• Fans
• Memory
• Network
Viewing health summary information 153