Installation Manual

2. Optional: Customize the graph display.
• Select the 3D check box to display a three-dimensional graph.
• Clear the 3D check box to display a two-dimensional graph.
• Select Front View or Back View to display the sensors located at the front or back of
the server.
3. Optional: Move the mouse over a circle on the graph to view individual sensor details.
The sensor ID, status, and temperature reading are displayed.
Temperature graph details
When you view the temperature graph, the circles on the graph correspond to the sensors listed
in the Sensor Data table.
The color on the graph is a gradient that ranges from green to red. Green represents a temperature
of 0°C and red represents the critical threshold. As the temperature of a sensor increases, the
graph color changes from green to amber, and then to red if the temperature approaches the
critical threshold.
Viewing temperature sensor data
1. Navigate to the Information→System Information page, and then click the Temperatures
tab.
2. Optional: When temperatures are displayed in Celsius, click the Show values in Fahrenheit
button to change the display to Fahrenheit. When temperatures are displayed in Fahrenheit,
click the Show values in Celsius button to change the display to Celsius.
3. Optional: By default, sensors that are not installed are hidden. To view the missing sensors,
click show missing sensors. When missing sensors are displayed, click hide missing
sensors to hide them.
156 Viewing iLO overview and system information