Installation Manual

Flex Slot Battery Backup Unit
The following information is displayed for supported servers with an installed Flex Slot Battery
Backup Unit:
• Charge—The current battery charge (percent).
• Days Active—The number of calendar days that the battery has been installed in a powered
server.
• Battery Health—The battery health status (0 to 100 percent).
Power capping and power metering are not supported on servers with an installed Flex Slot
Battery Backup Unit.
For more information, see the Flex Slot Battery Backup Unit installation instructions.
Model
The power supply model number.
Spare
The spare power supply part number.
Serial Number
The power supply serial number.
Capacity
The power supply capacity (watts).
Firmware
The installed power supply firmware version.
HPE Power Discovery Services iPDU Summary
This section is displayed if the server power supplies are connected to an iPDU.
After iLO is reset, or when an iPDU is attached, it takes approximately 2 minutes for the iLO web
interface to display iPDU summary data. This delay is due to the iPDU discovery process.
Bay
The power supply bay number.
Viewing power information 161