Installation Manual

Number of Sockets
The number of present memory module sockets.
Total Memory
The capacity of the memory, including memory recognized by the operating system and memory
used for spare, mirrored, or XOR configurations.
Operating Frequency
The frequency at which the memory operates.
Operating Voltage
The voltage at which the memory operates.
Memory Details
The Memory Details section shows the memory modules on the host that were installed and
operational at POST. Unpopulated module positions are also listed. Various resilient memory
configurations can change the actual memory inventory from what was sampled at POST. In
systems that have a high number of memory modules, all module positions might not be listed.
Memory Location
The slot or processor on which the memory module is installed.
Socket
The memory module socket number.
Status
The memory module status and whether the module is in use.
HPE Memory
Indicates whether the memory module is HPE SmartMemory or HPE Standard Memory.
If no memory module is installed, the value N/A is displayed. If the value No is displayed, the
listed module is not an HPE Memory module. Third-party memory modules will function, but they
do not have a warranty, and they might not perform as well as an HPE Memory module.
For more information, see http://www.hpe.com/info/memory.
Part Number
The memory module part number.
This value is displayed only for HPE Memory modules.
Type
The type of memory installed. Possible values follow:
• Other—Memory type cannot be determined.
• Board—Memory module is permanently mounted (not modular) on a system board or
memory expansion board.
Viewing memory information 167