Installation Manual

The following information is displayed only if AMS is installed and running on the server: Firmware
version and status of add-in network adapters, network-attached storage details, and Smart
Storage Battery status.
If the iLO firmware cannot retrieve the network adapter product name or part number directly
from the device, it attempts to collect that information from AMS.
Device Inventory details
• Location—The device install location.
• Product Name—The device product name.
• Product Part Number—The device part number.
This column displays the value Various when the actual part number of the listed device
depends on internally installed graphics devices that differ by server model.
• Assembly Number—The device part number (Hewlett Packard Enterprise devices) or the
EEPROM Board Info data (third-party devices).
• Serial Number—The device serial number.
• Product Version—The device product version.
• Firmware Version—The installed device firmware version.
• Status—The device status.
Device status values
The Device Inventory page uses the following status values:
• OK—The device is working correctly.
• Other—The device status could not be determined.
• No Supporting CPU—The CPU that supports the device slot is not installed.
• Not Installed—A device is not installed.
• Link Down—The network link is down.
• Failed—One or more components of the device are nonoperational.
• Degraded—The device is operating at a reduced capacity.
• Unknown—The iLO firmware has not received data about the device status.
Viewing PCI slot details
1. Navigate to the Information→System Information page, and then click the Device
Inventory tab.
172 Viewing iLO overview and system information