Installation Manual

Logical Drives
When the Logical View option is selected, the following information is listed for the logical drives
attached to a Smart Array controller.
• Logical drive number
• Status
• Capacity
• Fault Tolerance
• Logical Drive Type
• Encryption Status
Logical drives must be configured through the Smart Storage Administrator software before they
can be displayed on this page.
Physical Drives
The information listed in this section depends on whether the Logical View or Physical View
option is selected. In the Logical View, physical drives that are configured as part of an array
are listed. In the Physical View, all physical drives are listed.
When a physical drive has a Failed status, this status does not affect the overall storage health
status. Only logical drives affect the storage health status.
The following information is listed for the physical drives attached to a Smart Array controller:
• Physical drive port, box, and bay numbers
• Status
• Serial Number
• Model
• Media Type
• Capacity
• Location
• Firmware Version
176 Viewing iLO overview and system information