Installation Manual

• Drive Configuration
• Encryption Status
Direct-attached storage details
iLO displays information about the following:
• Controllers
• Physical drives
Controllers
This section provides the following information about the Hewlett Packard Enterprise and
third-party storage controllers that manage direct-attached storage.
• Controller location
• Top-level controller status—The top-level controller status (displayed on the left of the
controller location) is a combination of the controller hardware status and the status of the
enclosures, physical drives, and spare drives associated with the controller. If the controller
hardware status is OK, and any associated hardware has a failure, the top-level controller
status changes to Major Warning or Degraded, depending on the failure type. If the controller
hardware has a Failed status, the top-level controller status is Failed.
• Controller Status—Controller hardware status (OK or Failed)
• Serial Number
• Model
• Firmware Version
• Controller Type
Physical Drives
This section provides information about physical drives attached to Hewlett Packard Enterprise
and third-party storage controllers.
Viewing storage information 177