Installation Manual

When a physical drive has a Failed status, this status does not affect the overall storage health
status. Only logical drives affect the storage health status.
• Physical drive location
• Status
• Serial Number
• Model
• Media Type
• Capacity
• Location
• Firmware Version
• Drive Configuration
• Encryption Status
Viewing firmware information
Navigate to the Information→System Information page, and then click the Firmware tab.
The Firmware Information page displays firmware information for various server components.
If the server is powered off, the information on this page is current as of the last power off.
Firmware information is updated only when the server is powered on and POST is complete.
Firmware types
The firmware types listed on the Firmware Information page vary based on the server model
and configuration.
For most servers, the system ROM and iLO firmware are listed. Other possible firmware options
include the following:
• Power Management Controller
• Server Platform Services Firmware
• Smart Array
• Intelligent Platform Abstraction Data (supported servers only)
• Smart Storage Battery (supported servers only)
• TPM or TM firmware
• SAS Programmable Logic Device
• System Programmable Logic Device
• Intelligent Provisioning
• Networking adapters
• NVMe Backplane Firmware
Firmware information for hard drives is not listed on this page. To view hard drive firmware details,
navigate to the Information→System Information page, and then click the Storage tab.
178 Viewing iLO overview and system information