Installation Manual

Prerequisites
Configure iLO Settings privilege
Clearing the log
1. Navigate to the Information→Active Health System Log page.
The Active Health System Log is inaccessible when it is being used by Intelligent Provisioning
or the Active Health System download CLI tool.
2. Click Show Advanced Settings.
3. Scroll to the Clear Log section, and then click the Clear button.
4. When prompted to confirm the request, click OK.
iLO notifies you that the log is being cleared.
5. Reset iLO.
Resetting iLO after clearing the Active Health System Log is required because some Active
Health System data is recorded to the log only during iLO startup. Performing this step
ensures that a complete set of data is available in the log.
6. Reboot the server.
Rebooting the server after clearing the Active Health System Log is required because some
information, such as the operating system name and version, is logged at server startup.
Performing this step ensures that a complete set of data is available in the log.
More information
iLO diagnostics
192 Using the Active Health System