Installation Manual

3. Press F9 in the server POST screen.
The UEFI System Utilities start.
4. From the System Utilities screen, select System Configuration→iLO 4 Configuration
Utility→Set to factory defaults, and press Enter.
The iLO 4 Configuration Utility prompts you to select YES or NO.
5. Select YES, and press Enter.
6. When prompted to confirm the request, press Enter.
iLO resets to the factory default settings. If you are managing iLO remotely, the remote
console session is automatically ended. You cannot access the iLO 4 Configuration Utility
again until after the next system reboot.
7. Resume the boot process:
a. Optional: If you are managing iLO remotely, wait for the iLO reset to finish, and then
start the iLO remote console.
The iLO 4 Configuration Utility screen is still open from the previous session.
b. Press Esc until the main menu is displayed.
c. Select Exit and Resume Boot in the main menu, and press Enter.
d. When prompted to confirm the request, press Enter to exit the screen and resume the
boot process.
8. Optional: Use the default iLO account information to log in to iLO after the reset.
More information
iLO default credentials
198 Using the iLO diagnostics, reboot, and reset features