Installation Manual

2. Select a group from the Selected Group menu.
The scripted media device that you eject will be disconnected from all of the systems in the
selected group.
3. Click Eject Media in the Virtual Floppy Status section or the Virtual CD/DVD-ROM Status
section.
Servers affected by a Group Virtual Media action
The Affected Systems section provides the following details about the servers affected when
you initiate a Group Virtual Media action:
• Server Name—The server name defined by the host operating system.
• Server Power—The server power state (ON or OFF).
• UID Indicator—The state of the UID LED. The UID LED helps you identify and locate a
server, especially in high-density rack environments. The possible states are UID ON, UID
OFF, and UID BLINK.
• iLO Hostname—The fully qualified network name assigned to the iLO subsystem. To open
the iLO web interface for the server, click the link in the iLO Hostname column.
• IP Address—The network IP address of the iLO subsystem. To open the iLO web interface
for the server, click the link in the IP Address column.
Click Next or Previous (if available) to view more servers in the list.
More information
Exporting iLO Federation information to a CSV file
iLO Federation Group Power
The Group Power feature enables you to manage the power of multiple servers from a system
running the iLO web interface. Use this feature to do the following:
• Power off, reset, or power-cycle a group of servers that are in the ON or Reset state.
• Power on a group of servers that are in the OFF state.
• View the list of servers that will be affected when you click a button in the Virtual Power
Button section of the Group Power page.
Changing the power state for a group of servers
The Virtual Power Button section on the Group Power page summarizes the current power
state of the servers in a group. The summary information includes the total number of servers
that are in the ON, OFF, or Reset state. The System Power summary indicates the state of the
server power when the page is first opened. Use the browser refresh feature to update the System
Power information.
Prerequisites
• An iLO license that supports this feature is installed. For more information, see the following
website: http://www.hpe.com/info/ilo/licensing.
• Each member of the selected iLO Federation group has granted the Virtual Power and Reset
privilege to the group.
Changing the power state for a group
1. Navigate to the iLO Federation→Group Power page.
iLO Federation Group Power 205