Installation Manual

2. Optional: To filter the list of affected systems, click a license type or status link.
If you install a license key on a server that already has a key installed, the new key replaces
the installed key. If you do not want to replace existing licenses, click Unlicensed in the
License Information Status table to install licenses only on servers that are unlicensed.
3. Enter the license key in the Activation Key box.
To move the cursor between the segments in the Activation Key box, press the Tab key
or click inside a segment of the box. The cursor advances automatically when you enter
data into the segments of the Activation Key box.
4. Click Install.
The EULA confirmation dialog box opens. The EULA details are available in the License
Pack option kit.
5. Click OK.
The License Information section is updated to show the new license details for the selected
group.
Servers affected by a license installation
The Affected Systems section provides the following details about the servers that will be
affected when you install a license key:
• Server Name—The server name defined by the host operating system.
• License—The installed license type.
• iLO Firmware Version—The installed iLO firmware version.
• iLO Hostname—The fully qualified network name assigned to the iLO subsystem. To open
the iLO web interface for the server, click the link in the iLO Hostname column.
• IP Address—The network IP address of the iLO subsystem. To open the iLO web interface
for the server, click the link in the IP Address column.
Click Next or Previous (if available) to view more servers in the list.
More information
Exporting iLO Federation information to a CSV file
Using the iLO Federation Group Configuration feature
For information about using the features on the iLO Federation→Group Configuration page,
see “Adding iLO Federation group memberships (multiple iLO systems)” (page 56).
214 Using iLO Federation