Installation Manual

2. Click Launch.
A message notifies you that the .NET IRC is already in use.
3. Click Share.
The session leader receives your request to join the .NET IRC session.
If the session leader clicks Yes, you are granted access to the .NET IRC session with access
to the keyboard and mouse.
Console Capture (.NET IRC only)
Console Capture allows you to record and play back video streams of events such as startup,
ASR events, and sensed operating system faults. iLO automatically captures the Server Startup
and Server Prefailure sequences. You can manually start and stop the recording of console
video.
When you are using Console Capture, note the following:
• Console Capture is supported with the .NET IRC; it is not supported with the Java IRC.
• Console Capture is available only through the .NET IRC. It cannot be accessed through
XML scripting or the CLP.
• The Server Startup and Server Prefailure sequences are not captured automatically during
firmware updates or while the Remote Console is in use.
• Server Startup and Server Prefailure sequences are saved automatically in iLO memory.
They will be lost during firmware updates, iLO reset, and power loss. You can save the
captured video to your local drive by using the .NET IRC.
• The Server Startup file starts capturing when server startup is detected, and stops when it
runs out of space. This file is overwritten each time the server starts.
• The Server Prefailure file starts capturing when the Server Startup file is full, and stops when
iLO detects an ASR event. The Server Prefailure file is locked when iLO detects an ASR
event. The file is unlocked and can be overwritten after it is downloaded through the .NET
IRC.
• The Console Capture control buttons are on the bottom of the .NET IRC session window.
The following playback controls are available:
◦ Skip to Start—Restarts playback from the beginning of the file.
◦ Pause—Pauses the playback.
220 Using the iLO Remote Consoles