Installation Manual

3. The Save Video dialog box opens.
4. Enter a file name and save location, and then click Save.
5. When you are finished recording, press the Record button again to stop recording.
Viewing saved video files
Prerequisites
An iLO license that supports this feature is installed. For more information, see the following
website: http://www.hpe.com/info/ilo/licensing.
Viewing a saved video file
1. Start the .NET IRC.
2. Press the Play button.
The Playback Source dialog box opens.
3. Click the magnifying glass icon next to the From File box.
4. Navigate to a video file, and then click Open.
Video files captured in the Remote Console use the iLO file type.
5. Click Start.
Remote Console hot keys
The Program Remote Console Hot Keys page allows you to define up to six hot keys to use
during Remote Console sessions. Each hot key represents a combination of up to five keys that
are sent to the host server when the hot key is pressed. Hot keys are active during Remote
Console sessions that use the .NET IRC, Java IRC, and the text-based Remote Console.
If a hot key is not set—for example, Ctrl+V is set to NONE, NONE, NONE, NONE, NONE—this
hot key is disabled. The server operating system will interpret Ctrl+V as it usually does (paste,
in this example). If you set Ctrl+V to use another combination of keys, the server operating
system will use the key combination set in iLO (losing the paste functionality).
Example 1: If you want to send Alt+F4 to the remote server, but pressing that key combination
closes your browser, you can configure the hot key Ctrl+X to send the Alt+F4 key combination
to the remote server. After you configure the hot key, press Ctrl+X in the Remote Console window
when you want to send Alt+F4 to the remote server.
Example 2: If you want to create a hot key to send the international AltGR key to the remote
server, use R_ALT in the key list.
Creating hot keys
Prerequisites
Configure iLO Settings privilege
Creating a hot key
1. Navigate to the Remote Console→Hot Keys page.
2. For each hot key that you want to create, select the key combination to send to the remote
server.
To configure hot keys to generate key sequences from international keyboards, select the
key on a U.S. keyboard that is in the same position as the desired key on the international
keyboard. Table 6 (page 223) lists the keys you can use when you configure hot keys.
3. Click Save Hot Keys.
iLO confirms that the hot key settings were updated successfully.
222 Using the iLO Remote Consoles