Installation Manual

2. Scroll to the Current State section.
Current power state details
The values displayed in the Current State table vary depending on the server type.
• Present Power Reading—The current power reading from the server. This value is displayed
for all servers.
• Present Power Cap—The configured power cap for the server. This value is 0 if the power
cap is not configured. This value is displayed for ML and DL servers, and server blades.
• Power Input Voltage—The supplied input voltage for the server. This value is displayed
for ML and DL servers.
• Power Regulator Mode—The configured Power Regulator for ProLiant mode. This value
is displayed for all servers. For information about the possible settings, see “Power settings”
(page 252).
• Power Supply Capacity—The server power capacity. This value is displayed for SL and
XL servers.
• Peak Measured Power—The highest measured power reading. This value is displayed for
SL and XL servers.
Viewing the server power history
1. Navigate to the Power Management→Power Meter page.
2. Scroll to the Power History section.
Power history details
The Power History table shows power readings from three time periods: 5 minutes, 20 minutes,
and 24 hours.
• Average Power—The average of the power readings for the specified time period. If the
server has not been running for the specified time period, the value is the average of all
readings since the server booted.
• Maximum Power—The maximum power reading from the server for the specified time
period. If the server has not been running for the specified time period, the value is the
maximum of all readings since the server booted.
• Minimum Power—The minimum power reading from the server for the specified time period.
If the server has not been running for the specified time period, the value is the minimum of
all readings since the server booted.
When multiple power supplies are removed from the server at the same time, there is a short
time period in which iLO will not display information in the Power History section or in the Power
Viewing server power usage 251