Installation Manual

• Input Voltage Lost
• Fan Failure
• High Input A/C Warning
• Low Input A/C Warning
• High Output Warning
• Low Output Warning
• Inlet Temperature Warning
• Internal Temperature Warning
• High Vaux Warning
• Low Vaux Warning
• Mismatched Power Supplies
PDS
Whether the installed power supply is enabled for Power Discovery Services.
Power Discovery Services is an enhancement to the iPDU technology. If the chassis power
supply is connected to an iPDU, an additional summary table on this page displays the linked
iPDUs.
Hotplug
Whether the power supply bay supports swapping the power supply when the chassis is powered
on. If the value is Yes, and the power supplies are redundant, the power supply can be removed
or replaced when the chassis is powered on.
Flex Slot Battery Backup Unit
The following information is displayed for supported chassis with an installed Flex Slot Battery
Backup Unit:
• Charge—The current battery charge (percent).
• Days Active—The number of calendar days that the battery has been installed.
• Battery Health—The battery health status (0 to 100 percent).
Battery health issues are reported in the IML.
Power capping and power metering are not supported on chassis with an installed Flex Slot
Battery Backup Unit.
For more information, see the Flex Slot Battery Backup Unit installation instructions.
Model
The model number of the power supply.
Spare
The part number of the spare power supply.
Serial Number
The serial number of the power supply.
Capacity
The capacity of the power supply (watts).
260 Working with enclosures, frames, and chassis