Installation Manual

Firmware
The installed power supply firmware.
Intelligent Power Distribution Unit details
The Intelligent Power Distribution Units section is displayed only if the chassis power supplies
are connected to an iPDU.
After iLO is reset, or when an iPDU is attached, it takes approximately 2 minutes for the iLO web
interface to display the Intelligent Power Distribution Units table. This delay is due to the iPDU
discovery process. The following information is displayed in the table:
• ID—The power supply bay number.
• Part Number—The iPDU part number.
• Serial Number—The iPDU serial number.
• IP Address—The iPDU IP address.
• SSL Port—The iPDU SSL port.
• MAC Address—The MAC address of the iPDU network port. This value helps you to identify
each connected iPDU because each iPDU has a unique MAC address.
Smart Storage Battery details
• Index—The battery index number.
• Present—Whether a battery is installed. The possible values are OK and Not Installed.
• Status—The battery status. The possible values are OK, Degraded, Failed, or Other.
• Model—The battery model number.
• Spare—The part number of the spare battery.
• Serial Number—The battery serial number.
• Capacity—The battery capacity.
• Firmware—The installed battery firmware version.
Viewing chassis information 261