Installation Manual

Configuring the Embedded User Partition boot settings
You can use the UEFI System Utilities, UEFI Shell, RESTful Interface Tool, or iLO web interface
to configure the Embedded User Partition boot settings.
Configuring the Embedded User Partition boot order setting (iLO web interface)
Use the following procedure to change the position of the Embedded User Partition in the Server
Boot Order list.
NOTE: This feature is not available when the Legacy BIOS boot mode is selected.
1. Navigate to the Virtual Media→Boot Order page.
2. Select the Embedded User Partition device in the Server Boot Order list, and use the Up
and Down buttons to change the boot order.
The Embedded User Partition is listed with a name similar to the following:
Internal Virtual USB 4 : Embedded User.
3. Click Apply.
The following message appears:
Successfully set boot order.
Configuring the Embedded User Partition for one-time boot (iLO web interface)
Use the following procedure to set the position of the Embedded User Partition in the Server
Boot Order list.
NOTE: This feature is not available when the Legacy BIOS boot mode is selected.
1. Navigate to the Virtual Media→Boot Order page.
2. Select UEFI Target in the Select One-Time Boot Option list.
3. Select the Embedded User Partition from the Select UEFI Target Option list.
The Embedded User Partition is listed with a name similar to the following:
Internal Virtual USB 4 : Embedded User.
264 Using the Embedded User Partition