Installation Manual

4. Click Apply.
The following message appears:
Successfully set one-time boot option.
The Current One-Time Boot Option value is updated to show the selection.
Configuring the Embedded User Partition boot order setting (UEFI System Utilities)
Use the following procedure to change the position of the Embedded User Partition in the UEFI
Boot Order list.
NOTE: This feature is not available when the Legacy BIOS boot mode is selected.
1. Optional: If you access the server remotely, start an iLO remote console session.
2. Restart or power on the server.
3. Press F9 in the server POST screen.
The UEFI System Utilities start.
4. From the System Utilities screen, select System Configuration→BIOS/Platform
Configuration (RBSU)→Boot Options→UEFI Boot Order and press Enter.
5. From the UEFI Boot Order screen, press Enter to open the UEFI Boot Order list.
The Embedded User Partition is listed with a name similar to the following:
Internal Virtual USB 4 : Embedded User Partition.
6. Update the position of the Embedded User Partition in the boot order list, as needed.
• Use the arrow keys to navigate within the boot order list.
• To move an entry higher in the boot list, press the + key (plus).
• To move an entry lower in the list, press the - key (minus).
7. To save your selection, press F10.
8. From the System Utilities screen, select Exit and Resume Boot.
For more information about the UEFI Boot Order list, see the UEFI System Utilities user guide.
Configuring the Embedded User Partition for one-time boot (UEFI System Utilities)
Use the following procedure to set the position of the Embedded User Partition in the One Time
Boot Menu.
NOTE: This feature is not available when the Legacy BIOS boot mode is selected.
1. Optional: If you access the server remotely, start an iLO remote console session.
2. Restart or power on the server.
3. Press F9 in the server POST screen.
The UEFI System Utilities start.
Configuring the Embedded User Partition boot settings 265