Installation Manual

2. Log in to the HPE SIM server that you specified in Step 1, and discover the iLO processor.
After you complete the discovery process, SSO is enabled for iLO.
For more information about HPE SIM discovery tasks, see the HPE SIM user guide.
More information
HPE SSO
iLO identification and association
HPE SIM can identify an iLO processor and create an association between iLO and a server.
You can configure iLO to respond to HPE SIM identification requests by setting the Level of
Data Returned value on the Administration→Management page. For more information, see
“Configuring Insight Management integration” (page 124).
Viewing iLO status in HPE SIM
HPE SIM identifies iLO as a management processor. HPE SIM displays the management
processor status on the All Systems page.
The iLO management processor is displayed as an icon on the same row as its host server. The
color of the icon represents the status of the management processor.
For a list of device statuses, see the HPE SIM user guide.
iLO links in HPE SIM
For ease of management, HPE SIM creates links to the following:
• iLO and the host server from any System(s) list
• The server from the System page for iLO
• iLO from the System page for the server
The System(s) list pages display iLO, the server, and the relationship between iLO and the
server.
• To display the iLO web interface, click a status icon.
• To display the System page of the device, click the iLO or server name.
Viewing iLO in HPE SIM System lists
iLO management processors can be viewed in HPE SIM. A user who has full configuration rights
can create and use customized system collections to group management processors. For more
information, see the HPE SIM user guide.
Receiving SNMP alerts in HPE SIM
You can configure iLO to forward alerts from the management agents of the host operating
system and to send iLO alerts to HPE SIM.
HPE SIM supports full SNMP management. iLO supports SNMP trap delivery to HPE SIM. You
can view the event log, select the event, and view additional information about the alert.
Configuring the receipt of SNMP alerts in HPE SIM:
1. To enable iLO to send SNMP traps, navigate to the Administration→Management page
and configure the settings for SNMP, SNMP alerting, and Insight Management Integration.
Enter the IP address of the HPE SIM computer in the SNMP Alert Destination(s) box.
For more information, see “Configuring SNMP settings” (page 116).
276 Using iLO with other software products and tools