Installation Manual

2. To discover iLO in HPE SIM, configure iLO as a managed device for HPE SIM.
This configuration enables the NIC interface on iLO to function as a dedicated management
port, isolating management traffic from the NIC interface for the remote host server. For
instructions, see the HPE SIM user guide.
For major events that are not cleared, iLO traps appear in All Events. To obtain more
information about the event, click Event Type.
HPE SIM port matching
HPE SIM is configured to start an HTTP session to check for iLO at port 80. If you want to change
the port number, you must change it in both iLO and HPE SIM.
• To change the port in iLO, navigate to the Administration→Access Settings page, and
then enter the new port number in the Web Server Non-SSL Port box.
• To change the port number in HPE SIM, add the port to the config\identification\
additionalWsDisc.props file in the HPE SIM installation directory. If iLO uses the default
port (80), you do not need to edit this file.
The port entry must be on a single line with the port number first, and with all other items
identical to the following example (including capitalization). This example shows the correct
entry for discovering iLO at port 55000.
55000=iLO 4,
,true,false,com.hp.mx.core.tools.identification.mgmtproc.MgmtProcessorParser
Reviewing iLO license information in HPE SIM
HPE SIM displays the license status of the iLO management processors. You can use this
information to determine how many and which iLO devices have an optional license installed.
To view license information, select Deploy→License Manager. To ensure that the displayed
data is current, run the Identify Systems task for your management processors. For more
information, see the HPE SIM user guide.
Using iLO with HPE SIM 277