Installation Manual

10. Resume the normal boot process:
a. Start the iLO remote console.
The iLO 4 Configuration Utility is still open from the previous session.
b. Press ESC several times to navigate to the System Configuration page.
c. To exit the System Utilities and resume the normal boot process, press ESC.
Managing local user accounts with the ROM-based setup utilities
Adding user accounts (iLO RBSU)
1. Optional: If you access the server remotely, start an iLO remote console session.
2. Restart or power on the server.
3. Press F8 in the server POST screen.
The iLO RBSU starts.
4. From the iLO RBSU screen, select User→Add, and then press Enter.
5. Enter the following details:
• User Name
• Login Name
• Password and Verify password
6. Select from the following privileges. To enable a privilege, set it to Yes. To disable a privilege,
set it to No.
• Administer User Accounts
• Remote Console Access
• Virtual Power and Reset
• Virtual Media
• Configure iLO Settings
7. To save the new user account, press F10.
8. Repeat Step 4 through Step 7 until you are done creating user accounts.
9. Select File→Exit.
More information
iLO user privileges
User account options
Password guidelines
Editing user accounts (iLO RBSU)
1. Optional: If you access the server remotely, start an iLO remote console session.
2. Restart or power on the server.
3. Press F8 in the server POST screen.
The iLO RBSU starts.
4. From the iLO RBSU screen, select User→Edit, and then press Enter.
5. Select the user name that you want to edit, and then press Enter.
6. Update the user name, login name, password, or user privileges, and then press F10 to
save the changes.
7. Select File→Exit.
Managing local user accounts with the ROM-based setup utilities 29