Installation Manual

HPLOMIG management processor import list requirements
You can import a simple text file with one management processor listed on each line.
The supported columns, which are delimited with semicolons, follow:
• Network Address
• Product
• F/W Version
• DNS Name
• TPM Status
• User Name
• Password
• LDAP Status
• Kerberos Status
• License Type
For example, one line in the text file might have the following information:
16.100.225.20;iLO;1.10;ILOTPILOT2210;Not Present;user;password;Default
Schema;Kerberos Disabled;iLO Advanced
If, for security reasons, the user name and password cannot be included in the file, leave these
columns blank, but enter the semicolons.
Optional: Upgrading firmware on management processors (HPLOMIG)
After you click Next in the Find Management Processors window, the next task is to update
the iLO firmware, if needed. The upgrade process might take a long time, depending on the
number of selected management processors. The firmware upgrade of a single management
processor might take up to 5 minutes to complete.
IMPORTANT: Hewlett Packard Enterprise recommends that you test the upgrade process
and verify the results in a test environment before running HPLOMIG on a production network.
An incomplete transfer of the firmware image to a management processor might result in the
need to reprogram the management processor locally.
Prerequisites
Binary images of the firmware for the management processors must be accessible from the
system that is running HPLOMIG. These binary images can be downloaded from http://
www.hpe.com/support/ilo4.
306 Kerberos authentication and Directory services