Installation Manual

Upgrading firmware
1. Navigate to the Upgrade Firmware on Management Processors window if it is not already
open.
2. Select the management processors to upgrade.
3. For each selected management processor, click Browse, and then select a firmware image
file. You can also manually enter the path to the firmware image.
4. Click Upgrade Firmware.
The selected management processors are upgraded. Although HPLOMIG enables you to
upgrade hundreds of management processors, only 25 management processors are upgraded
simultaneously. Network activity is considerable during this process.
If an upgrade fails, a message is displayed in the Results column, and the utility continues
to upgrade the other selected management processors.
During the firmware upgrade process, all buttons are deactivated to prevent navigation.
5. After the upgrade is complete, click Next.
More information
Obtaining the iLO firmware image file
Selecting directory configuration options
After you click Next in the Upgrade Firmware on Management Processors window, the next
task is to select the management processors to configure, and to specify the directory options
to enable.
Configuring directory authentication with HPLOMIG 307