Installation Manual

More information
iLO user privileges
User account options
Password guidelines
Editing or removing user accounts (iLO 4 Configuration Utility)
1. Optional: If you access the server remotely, start an iLO remote console session.
2. Restart or power on the server.
3. Press F9 in the server POST screen.
The UEFI System Utilities start.
4. From the System Utilities screen, select System Configuration→iLO 4 Configuration
Utility→User Management→Edit/Remove User, and press Enter.
5. Select the Action menu for the user name you want to edit or delete, and press Enter.
6. Select one of the following, and press Enter.
• No Change—Returns you to the main menu.
• Delete—Deletes this user.
• Edit—Edits the user.
7. Depending on your selection in Step 6, do one of the following:
• If you selected No Change, no further action is needed.
• If you selected Delete, the user name is marked to be deleted when you save the
changes on this page.
• If you selected Edit, update the login name, password, or user permissions.
8. Update as many user accounts as needed, and then press F10.
9. Press Esc until the main menu is displayed.
10. Select Exit and Resume Boot in the main menu, and then press Enter.
11. When prompted to confirm the request, press Enter to exit the utility and resume the boot
process.
More information
iLO user privileges
User account options
Password guidelines
iLO setup with the web interface
If you can connect to iLO on the network by using a web browser, you can use the iLO web
interface to configure iLO. You can also use this method to reconfigure an iLO management
processor.
Access iLO from a remote network client by using a supported browser and providing the default
DNS name, user name, and password.
Logging in to iLO for the first time
1. Enter https://<iLO hostname or IP address>.
HTTPS (HTTP exchanged over an SSL encrypted session) is required for accessing the
iLO web interface.
2. Enter the default user credentials, and then click Log In.
iLO setup with the web interface 31