Installation Manual

The boxes on the Configure Directory window follow:
• Network Address—The network address of the directory server, which can be a valid DNS
name or IP address.
• Port—The SSL port to the directory. The default port is 636. Management processors can
communicate with the directory only by using SSL.
• Login Name and Password—Enter the login name and password for an account that has
domain administrator access to the directory.
• Container DN—After you have the network address, port, and login information, you can
click Browse to search for the container DN. The container is where the migration utility will
create the management processor objects in the directory.
• Role(s) DN—After you have the network address, port, and login information, you can click
Browse to search for the role DN. The role is where the role to be associated with the device
objects resides. The role must be created before you run this utility.
To configure the device objects to be associated with a role:
1. Enter the network address, login name, and password for the designated directory server.
2. Enter the container DN in the Container DN box, or click Browse to select a container DN.
Configuring directory authentication with HPLOMIG 311