Installation Manual

7. Click Configure, and then click Next when the button is available.
8. Optional: Test the directory settings.
This feature is supported with HPLOMIG 4.80 and later, and iLO 4 2.40 and later.
a. Select one or more iLO systems.
b. In the Directory Test Controls section, enter the following:
• Directory Administrator Distinguished Name and Directory Administrator
Password—Searches the directory for iLO objects, roles, and search contexts.
This user must have the right to read the directory.
Hewlett Packard Enterprise recommends that you use the same credentials that
you used when creating the iLO objects in the directory. iLO does not store these
credentials; they are used to verify the iLO object and user search contexts.
• Test User Name and Test User Password—Tests login and access rights to iLO.
This name does not need to be fully distinguished because user search contexts
can be applied. This user must be associated with a role for this iLO.
Typically, this account is used to access the iLO processor being tested. It can be
the directory administrator account, but the tests cannot verify user authentication
with a superuser account. iLO does not store these credentials.
c. Click Start Test.
Several tests begin in the background, starting with a network ping of the directory user
by establishing an SSL connection to the server and evaluating user privileges.
9. To view the individual test results, double-click an iLO system in the list.
314 Kerberos authentication and Directory services