Installation Manual

Solution 1
Action
1. Close the .NET IRC or Java IRC.
2. Navigate to the Power Management→Power Settings page.
3. Clear the Enable persistent mouse and keyboard check box, and then click Apply.
4. Start the .NET IRC or Java IRC again.
Solution 2
Action
Right-click and drag the mouse cursor outside the Remote Console window, and then drag it
back inside.
Solution 3
Action
For the Java Applet only:
1. Shut down and exit your browser.
2. Open the Java Control Panel.
3. Navigate to the Java Runtime Environment Settings dialog box.
4. Add the following runtime parameter:
–Dsun.java2d.d3d=false
5. Click OK and close the Java Runtime Environment Settings window.
6. Click Apply, and then click OK to close the Java Control Panel.
NOTE: Viewing your changes before you click Apply might reset the Runtime Parameters
dialog box, causing your edits to be lost.
iLO .NET IRC sends characters continuously after switching windows
Symptom
When you switch to a different window, the .NET IRC sends characters continuously.
Cause
If you press a key during a .NET IRC session, and you switch windows, the key might remain
pressed in the session, causing the character to repeat continuously.
Action
Bring the remote console window to the front of your desktop by clicking the .NET IRC window.
iLO Java IRC displays incorrect floppy and USB-key device information
Symptom
When the Firefox browser is used, the Java IRC might display incorrect floppy drive and USB-key
device information.
Cause
The client OS or Java software might be out of date.
Remote Console issues 339