Installation Manual

Action
1. Make sure that Red Hat Enterprise Linux 5 or later is installed on the local client system.
2. Install the latest version of Java and configure it to connect through the Firefox browser.
3. Log in to the iLO web interface.
4. Insert a USB key or floppy disk on the local client system.
5. Verify that you can access the USB key or floppy disk.
6. Open a Java IRC session.
7. Select Virtual Drives→Image File Removable Media.
The Choose Disk Image File dialog box opens.
8. Type or select the path of the USB key or floppy disk (/dev/disk) inserted in the client.
You can also mount the USB key or floppy disk by label.
9. Click OK.
Caps Lock out of sync between iLO and Java IRC
Symptom
When you log in to the Java IRC, the Caps Lock setting might be out of sync between iLO and
the Java IRC.
Action
To synchronize the Caps Lock settings, select Keyboard→Caps Lock in the Java IRC.
Num Lock out of sync between iLO and Shared Remote Console
Symptom
When you log in to a Shared Remote Console session, the Num Lock setting might be out of
sync between iLO and some of the Remote Console sessions.
Action
To synchronize the Num Lock settings, select Keyboard→Num Lock in the Remote Console.
Keystrokes repeat unintentionally during iLO Remote Console session
Symptom
A keystroke repeats unintentionally during a Remote Console session.
Solution 1
Cause
A network issue might be causing network latency.
Action
Identify and fix problems that might cause network latency.
Solution 2
Cause
The remote system settings are causing a delay.
340 Troubleshooting