Installation Manual

Solution 1
Cause
Multiple users are logged in to iLO.
Action
Try the following:
• Reduce the number of simultaneous iLO user sessions.
• Reset iLO.
Solution 2
Cause
A connected Virtual Media session is being used to perform a continuous copy operation. The
continuous copy operation takes priority and, consequently, the .NET IRC loses synchronization.
Eventually, the Virtual Media connection resets multiple times and causes the USB media drive
for the OS to lose synchronization with the Virtual Media client.
Action
Try the following:
• Reconnect to the .NET IRC and the Virtual Media.
• Reset iLO.
iLO .NET IRC failed to connect to server
Symptom
iLO displays the message Failed to connect to server when it attempts to establish a
.NET IRC session.
Solution 1
Cause
The network response is delayed. The iLO .NET IRC client waits a specified amount of time for
a connection to be established with iLO. If the client server does not receive a response in this
amount of time, it displays an error message.
Action
Correct the network delay and retry the .NET IRC connection.
Solution 2
Cause
A Shared Remote Console session is requested, but the session leader delayed sending an
acceptance or denial message. The iLO .NET IRC client waits a specified amount of time for a
connection to be established with iLO. If the client server does not receive a response in this
amount of time, it displays an error message.
Action
Contact the .NET IRC session leader and retry the request, or use the Remote Console Acquire
feature. For more information, see “Acquiring the Remote Console” (page 218).
342 Troubleshooting