Installation Manual

6. Select the language pack, and then click Open.
iLO prompts you to confirm the installation.
For iLO 4 2.10 and earlier: If you have a previously installed language pack, this language
pack will replace it if you proceed with the installation.
7. Click OK.
8. Click Install.
iLO installs the language pack, reboots, and closes your browser connection.
It might take several minutes before you can re-establish a connection.
Selecting a language pack
Use one of the following methods to select an installed language pack:
• Navigate to the login page, and then select a language in the Language menu.
• Click the Language menu in the toolbar on the bottom right side of the browser window,
and then select a language.
• Select a language on the Administration→Access Settings→Language page. For
instructions, see “Configuring the current browser session language” (page 41).
40 Updating iLO firmware, language, and licensing