Manualshelf

Installation Manual

ManualsBrandsHP ManualsComputers & AccessoriesHigh-End HP ProLiant DL360P G8 Server 2 x 2.90Ghz E5-2690 8C 192GB 8x Caddies (Certified Refurbished)
41424344454647484950
Configuring the default language settings
Prerequisites
Configure iLO Settings privilege
Setting the default language
Use this procedure to configure the default language for the users of this instance of the iLO
firmware.
1. Navigate to the Administration→Access Settings→Language page.
2. Select a value in the Default Language menu.
The available languages are English and any other language for which a language pack is
installed.
3. Click Apply.
iLO notifies you that the default language was changed.
In subsequent iLO web interface sessions, if there is no browser cookie from a previous
session, and the browser or OS language is not supported, the iLO web interface uses the
configured default language.
Configuring the current browser session language
1. Navigate to the Administration→Access Settings→Language page.
2. Select a value in the Current Language menu.
The available languages are English and any other language for which a language pack is
installed.
3. Click Apply.
The iLO web interface for the current browser session changes to the selected language.
Uninstalling a language pack
Prerequisites
Configure iLO Settings privilege
Removing a language pack
1. Navigate to the Administration→Access Settings→Language page.
2. For iLO 4 2.20 or later: Select the check box next to the language you want to uninstall.
3. Click Uninstall.
4. When prompted to confirm the request, click OK.
iLO removes the selected language pack, reboots, and closes your browser connection.
It might take several minutes before you can re-establish a connection.
How iLO determines the session language
iLO uses the following process to determine the language of a web interface session:
1. If you previously logged in to the iLO web interface on the same computer using the same
browser, and you have not cleared the cookies, the language setting of the last session with
that iLO processor is used.
2. If there is no cookie, the current browser language is used if iLO supports it and the required
language pack is installed.
Language packs 41