Installation Manual

Editing iLO Federation group memberships (local iLO system)
Prerequisites
Configure iLO Settings privilege
Editing a group membership
1. Navigate to the Administration→iLO Federation page.
2. Select a group membership, and then click Edit to open the Add/Edit Federation Group
page.
3. To change the group name, enter a new name in the Group Name box.
The group name can be 1 to 31 characters long.
4. To change the group key, enter a new value in the Group Key and Group Key Confirm
boxes.
The group key can be from the configured minimum password length to 31 characters long.
5. Select or clear the check boxes for the privileges you want to update.
The privileges granted to the group by the local iLO system control the tasks that users of
other iLO systems in the group can perform on the managed server.
6. Click Update Group.
More information
iLO Federation settings
iLO Federation groups
Removing a local iLO system from an iLO Federation group
Prerequisites
Configure iLO Settings privilege
Removing a group membership
1. Navigate to the Administration→iLO Federation page.
2. Select the check box next to the group membership that you want to delete.
3. Click Delete.
4. When prompted to confirm the request, click OK.
Adding iLO Federation group memberships (multiple iLO systems)
Adding an iLO Federation group based on an existing group
Use this procedure to create an iLO Federation group with the same members as an existing
group. For example, you might want to create a group that contains the same systems that are
in the DEFAULT group, but with additional privileges.
Prerequisites
• Configure iLO Settings privilege
• An iLO license that supports this feature is installed. For more information, see the following
website: http://www.hpe.com/info/ilo/licensing.
56 Configuring iLO Federation